top of page
hosp3-min.jpg
ABATEMENT HC500CD

MEDICAL GRADE CEILING AIR PURIFIER HC500CD

ABATEMENT HC500CD
ABATEMENT HC500CD

3,927.50$

BUY ONLINE

ABATEMENT HC500CD filters

HC500CD AIR FILTERS

HEPA-CARE® HC500CD Ceiling-Mounted Air Purification System HC500CD

​

  • Ideal for rooms with inadequate floor space for a portable unit

  • Five motor speed settings, with peak output of 200cfm up-to 550cfm*

  • The separate control module can be wall mounted near the room or remotely in another area of the building

  • Password protected to prevent tampering

  • For 9/16" ceiling grids, an optional adaptor must be purchased (P/N: HC590CG)

Ceiling-Mounted Air Purifier with HEPA Filtration Provides Less Costly Solution for Creating Patient Isolation Rooms

The ceiling-mounted HEPA-CARE® HC500CD Air Purification System from Abatement Technologies® is the perfect solution for creating CDC / CSA-compliant negative pressure isolation rooms in fixed locations in hospitals and healthcare facilities.

 

When not being used in negative pressure mode, the flexible HC800CD can also be operated as a continuous recirculating air purifier. Compared to ‘design and build’ isolation rooms, the two-module HC500CD is far less costly to add and implement.

The filtration module suspends completely out of the way in a 2 ft. x 4 ft. drop ceiling grid.

ABATEMENT HC500CD

The separate, tamper-resistant control panel box can be wall-mounted within the same area as the HC800CD or remotely in another area of the building. The unit is equipped with an H14 Type HEPA filter tested and certified to capture at least 99.995% of microscopic particles 0.3 microns in size.

​​

“Dirty” air laden is first pulled through two filter stages:

STAGE 1 - A 2” particulate pre-filter treated 

STAGE 2 -A pharmaceutical-grade HEPA filter with silicone-gel seal

​​

Optional VAPOR-LOCK® Carbon Filters Remove Odors and Gases

HC500CD can also be equipped with an optional VAPOR-LOCK® high-capacity, activated carbon filter to remove odors and gases. The VAPOR-LOCK® filter replaces the standard 2” particulate pre-filter and must be ordered separately. 

Net Weight with Filters lbs.

Dimensions (L x W x H) in. (cm)

Electrical Rating V, Hz, A

Airflow max with clean filters CFM

Max operating Amps

Motorized Impeller

Motorized Impeller speed setting

Circuit braker amp

Sound Level @ 5 Feet dBA

HEPA Filter Efficiency

Cabinet Material

First Stage Prefilter 1 ea.

Optional Carbon Prefilter 1 ea.

​HEPA Filter 1 ea.

ABATEMENT HC500CD

44

22.875 x 22.875 x 16.25

120 VAC, 60 Hz, 15 A

200 - 500

6 amp or less

1 EC Motorized Impeller

5 touch screen speed settings

5 amp

38 - 59

99.995% @ 0.3 microns,

Powder coated aluminum, riveted and sealed

HC1802AM, 2” ASHRAE MERV 8 pleated​​

HC1802CF

HC1818-H14

​​​​Advanced features of the HC500CD Ceiling-Mounted Air Purification System include:

  • Installs Out-of-the-Way - Suspends neatly and permanently in a 2 ft. x 2 ft. drop ceiling grid

  • Powerful Airflow - Energy-efficient motorized impeller rated for 100,000 hours of maintenance-free operation

  • Unique Zero-Bypass Dual Cabinet Design - Added assurance that contaminated air can’t bypass the HEPA filter

  • Durable Cabinet - powder-coated aluminum and advanced assembly techniques create a refined look and are easy to decontaminate and maintain

  • Safety Certification - Certified as a Class II Medical Devices under FDA 510K and NRTL certified to conform with relevant UL and CSA safety standards

  • Control Panel - Intuitive digital touch screen installs in the room or remotely.

 

Operates Quietly Above the Ceiling

With quiet background operation (35 dBA to 59 dBA @ 5’), the HC500CD is hard to notice at work creating negative pressure and purifying the air.

​

Long-Life HEPA Filter with Strong Aluminum Frame

Each pharmaceutical-grade HEPA filter from Abatement Technologies® is individually tested and certified in accordance with the Institute of Environmental Sciences and Technology IEST-RP-CC001 to provide minimum filtration efficiency of 99.995% against a 0.3 micron challenge aerosol. The high-performance HEPA filter is mounted within a strong anodized aluminum frame that will not warp.

​

Silicone-Gel Seal Protects Against Contaminated Air Bypass

A downward-facing flange imbeds into a silicone-gel seal creating a channel that forces air through the HEPA filter and protects against the risk of contaminated air bypassing the filter.

​

Hinged Door for Rapid Filter Replacement

Hinged, front door secures with two Phillips machine screws and provides quick access to both the HEPA filter and the 2” particulate pre-filter for replacement or maintenance.

​

Low-Profile, Wall-Mounted Control Panel Box

High-visibility, color LCD touch screen control box installs in the room or remotely. Intuitive, menu-driven screens are accessed after opening the Password Entry Screen:

  • Digital 3.25" LCD touch screen

  • Password protection

  • Five airflow settings

  • Menu-driven display for monitoring various operating parameters

  • Increased reliability Green ‘Unit On’ indicator that illuminates when the unit is powered

  • Yellow ‘Warning" Change Pre-Filter’ indicator that illuminates when the pre-filter and/or HEPA filter are approaching the load limit

  • Red ‘Change HEPA Filter’ indicator that illuminates when the HEPA is loaded

  • LCD display for status indication, setup and operating modes

  • Modular design for ease of service

​​

Safety Certified

All Abatement HEPA-CARE® units have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards. Filters meet UL900 flammability standards.

bottom of page